KR wheel alignment specs please

[Jack4159]

4159 is off for a wheel alignment tomorrow.
My Shelby owners manual is for "1967 Shelby GT350/500" and states:

Caster   2 degrees positive
Camber  0 degrees
Toe-in     1/8in. total

Is it the same for a 68?
If not can anyone advise specs please, I tried searching but got lots of varying info.

Thanks in advance as always.

[TLea]

Caster will be fine between 1.5 and 2.5
Camber 0 is minimum, I generally try for .25 to .50+ with .25 more on drivers side to help compensate for road crown. 1/8 toe in perfect

[Jack4159]

Thanks Tim much appreciated.