News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

sway bar bushing bolt #5495

Started by EdwardGT350, July 19, 2018, 08:42:19 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

EdwardGT350

July 19, 2018, 08:42:19 PM
ive seen several concours cars with this bolt installed with the nut on the bottom(closest to ground) but the chassis manual shows nut on top.
which is correct?
did assembly line workers faithfully follow the manual or was the manual updated at some point?
thanks
1966 GT350 6s1761

EdwardGT350

#1
July 19, 2018, 08:43:10 PM
......
1966 GT350 6s1761

EdwardGT350

#2
July 19, 2018, 08:43:54 PM
....
1966 GT350 6s1761

Bob Gaines

#3
July 20, 2018, 12:01:20 AM
Quote from: EdwardGT350 on July 19, 2018, 08:42:19 PM
ive seen several concours cars with this bolt installed with the nut on the bottom(closest to ground) but the chassis manual shows nut on top.
which is correct?
did assembly line workers faithfully follow the manual or was the manual updated at some point?
thanks
I think you are referring to the end link bolt based on your picture. Yes it is supposed to go threads up . If you saw it the other way shame on them .
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

EdwardGT350

#4
July 20, 2018, 12:21:15 AM
yes. thanks bob 👍🏻
1966 GT350 6s1761
Print
Go Up Pages1
User actions