convertible alignment pins

[imming1965]

are 1969-70 convertible top alignment pins unique to 69-70? does anyone have a picture of them? if so does anyone have any they might part with, thanks Jeremy

[Bill]

are 1969-70 convertible top alignment pins unique to 69-70? does anyone have a picture of them? if so does anyone have any they might part with, thanks Jeremy

Regular 1969 mustang/cougar item.


Bill S.

[shelbymann1970]

are 1969-70 convertible top alignment pins unique to 69-70? does anyone have a picture of them? if so does anyone have any they might part with, thanks Jeremy

NPD is out but it is a referenced 69 part number and 69 only? I don't know why 70 would be different so now I'll dig out my 70 top frame and see if they are different than the ones on my 69 top frame on my Shelby. https://www.npdlink.com/product/convetible-top-header-bow-alignment-pin/169877?backurl=search%2Fproducts%3Fsearch_terms%3Dalignment%252Bpin%252Bconvertible%252Btop%26top_parent%3D200001%26year%3D1969&year=1969

[SCJSTU]

PARTS HOUSES have been out of the 69 pin for a while...I used a 67-68 pin before fits fine just slightly different

may check with West Coast Cougar

or All Classic Motors http://www.allclassicmustang.com/1969MustangPartsNew.html

[shelbymann1970]

PARTS HOUSES have been out of the 69 pin for a while...I used a 67-68 pin before fits fine just slightly different

may check with West Coast Cougar

or All Classic Motors http://www.allclassicmustang.com/1969MustangPartsNew.html

I'm now trying to find out if the 70 pin is different.

[imming1965]

PARTS HOUSES have been out of the 69 pin for a while...I used a 67-68 pin before fits fine just slightly different

may check with West Coast Cougar

or All Classic Motors http://www.allclassicmustang.com/1969MustangPartsNew.html

I'm now trying to find out if the 70 pin is different.

they look to be different. if you have a set you would sell let me know, thanks Jeremy

[shelbymann1970]

PARTS HOUSES have been out of the 69 pin for a while...I used a 67-68 pin before fits fine just slightly different

may check with West Coast Cougar

or All Classic Motors http://www.allclassicmustang.com/1969MustangPartsNew.html

I'm now trying to find out if the 70 pin is different.

they look to be different. if you have a set you would sell let me know, thanks Jeremy

If I do they would be off a 70.

[Bob Gaines]

are 1969-70 convertible top alignment pins unique to 69-70? does anyone have a picture of them? if so does anyone have any they might part with, thanks Jeremy

You will most like have to use a substitute as a place holder until you find a more correct pin. at least the substitute is inexpensive.

[Special Ed]

70 is a little longer than 69 if i remember correctly

[Krelboyne]

Jack, at Dead Nuts On, was making the version in the OP's picture.
Since he moved to the East Coast, he lost his machinist. I gave him a lead, and that lead suggested another. Hopefully, Jack has someone soon to manufacture them.

[shelbymann1970]

70 is a little longer than 69 if i remember correctly

Like I say I'm still learning new things all the time. I didn't know the pins would be different between the 2 years.

[Special Ed]

70 is not as long as 67 c70z pins so 67 wont work on 70.