News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

parts finishes

Started by shelbymann1970, June 01, 2024, 12:00:25 PM

Previous topic - Next topic

shelbymann1970

OK, I know the finishes on these parts as they pertain to service parts(clear zinc I believe on Zbar components and black paint on mounts). so what were they from the factory for a GT500 428.
Z-bar
Z-bar frame mount
Z-bar engine mount
engine frame mounts
engine engine mounts(bolts to block)
Engine insulators.
is there a correct paint code for the steel wheels?
Tail light panel paint code(have original paint on mine)
Thanks in advance.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

Coralsnake

Z-bar bare steel
Z-bar frame mount bare steel
Z-bar engine mount bare steel
engine frame mounts bare steel
engine engine mounts(bolts to block) bare steel
Engine insulators. Painted black

Steel wheels are semigloss black

Tail light panel Ford Argent
The original Influencer, check out www.thecoralsnake.com

Coralsnake

Argent is Ditzler/PPG # 32520. The Dupont number is 97772.
The original Influencer, check out www.thecoralsnake.com

shelbymann1970

Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626