Original numbers matching engine found do I pay the ransom ?

[deathsled]

If the car wasn't so special, then ignoring the offer wouldn't matter so much.  Sometimes it is a much larger thing that drives the motivation for a big asking price, and I would pin some of it on the macroeconomics of an enormously mismanaged economy that we have endured for a specified period of time.  Men may be feathering their nests for a possible upcoming devastating blow in the not-so-distant future.

As an addendum, couldn't the engine be sleeved as part of a rebuild as opposed to boring it out?  My rudimentary understanding is that the 289 engine can only be bored .030 once and then no more due to the thin wall construction, no?

[427hunter]

If the car wasn't so special, then ignoring the offer wouldn't matter so much.  Sometimes it is a much larger thing that drives the motivation for a big asking price, and I would pin some of it on the macroeconomics of an enormously mismanaged economy that we have endured for a specified period of time.  Men may be feathering their nests for a possible upcoming devastating blow in the not-so-distant future.

As an addendum, couldn't the engine be sleeved as part of a rebuild as opposed to boring it out?  My rudimentary understanding is that the 289 engine can only be bored .030 once and then no more due to the thin wall construction, no?

I won't know what I have to do till I tear it apart, supposedly it's standard and spun a bearing, we shall see.  Better to go .30 then sleeve it.  I hope I am able to ball hone it, polish the crank and ring and bearing it - wishful thinking I know.....

[NC TRACKRAT]

Question:  He has the short block but do you have all the correct items that were originally on it (intake, carb, dizzy, timing cover, etc.)?

[pchmotoho]

I like Greeks idea.  Buy it and use it as a static display until you figure out what you want you do with it.  I would jump at the opportunity to get the original block back.

[427hunter]

Question:  He has the short block but do you have all the correct items that were originally on it (intake, carb, dizzy, timing cover, etc.)?

Yes, I alread have a correct hipo 289 in the car - that's why I was reluctant to buy the block.

[wcampbell]

I would be glad that you can at least have the conversation and the gentleman is "open" to helping you reunite the engine with the car.

Consider my situation...a fellow "owner" and "car guy" knows where my engine is and talks to the current owner occasionally - who calls him asking if he's interested in negotiating for the engine. Despite this he isn't willing to let me talk directly to the engine owner even when I offered a "fee" if a deal to get the engine back materialized. Instead he's trying to buy the engine and then deal directly with me. While I'm okay with that too- he doesn't seemed to be interested making this happen to help me reunite the two. So I'm stuck knowing it's out there and potentially available, but a fellow "hobbyist" is blocking me and isn't allowing it to happen. This is almost the total opposite of your scenario.

[Grumpy]

If the car wasn't so special, then ignoring the offer wouldn't matter so much.  Sometimes it is a much larger thing that drives the motivation for a big asking price, and I would pin some of it on the macroeconomics of an enormously mismanaged economy that we have endured for a specified period of time.  Men may be feathering their nests for a possible upcoming devastating blow in the not-so-distant future.

My rudimentary understanding is that the 289 engine can only be bored .030 once and then no more due to the thin wall construction, no?

  Better to go .30 then sleeve it.  I hope I am able to ball hone it, polish the crank and ring and bearing it - wishful thinking I know.....

Once ya go .30 thats the end of the block. I'd sleeve it an keep it standard bore. Sleeving has come a long way. If the standard bore is loose you can cure it with coatings. We race a V6 Buick Turbo. 8 sec @ 150+. Buick blocks are getting harder to get so we try an keep the block survivable for more rebuilds.
.... What if ya did go .30 an had an engine fail ? Shit happeneds ... If ya need an info on coatings message me. 

[427hunter]

If the car wasn't so special, then ignoring the offer wouldn't matter so much.  Sometimes it is a much larger thing that drives the motivation for a big asking price, and I would pin some of it on the macroeconomics of an enormously mismanaged economy that we have endured for a specified period of time.  Men may be feathering their nests for a possible upcoming devastating blow in the not-so-distant future.

My rudimentary understanding is that the 289 engine can only be bored .030 once and then no more due to the thin wall construction, no?

  Better to go .30 then sleeve it.  I hope I am able to ball hone it, polish the crank and ring and bearing it - wishful thinking I know.....

Once ya go .30 thats the end of the block. I'd sleeve it an keep it standard bore. Sleeving has come a long way. If the standard bore is loose you can cure it with coatings. We race a V6 Buick Turbo. 8 sec @ 150+. Buick blocks are getting harder to get so we try an keep the block survivable for more rebuilds.
.... What if ya did go .30 an had an engine fail ? Shit happeneds ... If ya need an info on coatings message me. 

Appreciate it, I am picking it up this weekend so when I get it home I will know more - I hope I can leave it standard and ball hone it, we shall see.

[FL SAAC Team Leader]

Appreciate it, I am picking it up this weekend so when I get it home I will know more - I hope I can leave it standard and ball hone it, we shall see.

Extremely happy you made that decision!

[deathsled]

Congrats. Exciting times await!

[GT350Lad]

Exciting times! Please keep use posted
And send some pics?
Maybe I missed it but is it just the block?

[roddster]

  Really, it only matters if it matters to you.

[deathsled]

Really, it only matters if it matters to you.

True words Roddster.  Good to see you at the Kane County Concours by the way.

[5F09K]

I was in the same situation 2 months ago with my 5F09K. I paid $3000 for the original short block. Just the block, no caps, pistons or rods. Standard bore but hopefully no cracks. Currently on the sea to France, I will check it here and hopefully the block can be machined. $3000 for the block and about $1000 for shipping and fees.
But I am happy to give the original  block back to my kar, and it is just a kcode.

[hertzz350]

If i had the chance to get the original numbers block for my car i would pull the trigger on it. As long as you have it in your possession, it doesnt matter if its in the car or not.