Windshield washer hoses at cowl mounting hardware

[deathsled]

I was told I was missing these on my car.  Wondering where they might go on the cowl.
https://www.kentuckymustang.com/windshield-washer-hoses-at-cowl-mounting-hardware-1964-1-2-1966-amk.html?gad_source=1&gclid=Cj0KCQjwm5e5BhCWARIsANwm06gMk3hzXflhugb0_bTBmmLWR8HDDCuH1zzhB3bO8KS9gJ8Htz2H3UgaAjIpEALw_wcB

[Brant]

Not the greatest pictures, but the only ones that I could find quickly.

https://www.virginiaclassicmustang.com/65-66-WASHER-HOSE-CLIPS-ON-COWLFIREWALL-SET-OF-2-P1214.aspx

[deathsled]

That clears it up.  Thank you very much.

[J_Speegle]

Those are the two clips used to hold the washer hose to the unibody at the cowl to pinch weld in the engine compartment

Since the export brace got in the way of where they were typically installed on 66 Mustangs built at San Jose the workers positioned them differently on cars that would be Shelby's

Here are three pictures from either unrestored examples or from cars in 1966

These all are from sub 600 cars if that matters to anyone

[deathsled]

Thank you J.S. for the detailed photos.