WTD: 67 Shelby Parts

[Kyle]

Hi All,

Happy New Year!

I am looking for these Original parts for a 67 GT500. I need all Original parts NOS or Used in a Nice condition.

:AUTOLITE sender C6DZ-10884-B dated 6H-6L with red insulator

:NOS C7ZZ-3A713-B P/S return hose

:NOS bypass hose from intake to water pump

: (10) Original RBW BOLTS for valve covers

: (10) intake bolts with head markings number 5

: ( intake to carbs studs

: Pink alternator spacer to Engine block

: Nice stamped C5AF-10A352-J2 alternator pulley

: Power Brake Vacuum Tube that goes on the back of the intake

: NOS Autolite radiator cap chrome rivet RS-12 13#

: NOS C1AZ-8591-A water pump repair kit

: 1 or 2 775\C/ crimp clamps

: 1 or 2 745\C/ crimp clamps

: 1-8 590\C/ crimp clamps

: C6 31 spline rear axle shafts

: Throttle Return Spring

: Intake PCV basket and Filter

: engine gauge feed/Sender wiring harness

PM sent or Email kylezammit123@gmail.com if anyone have anything or someone know who have something.



Thanks Kyle.

[Kyle]

Still looking to find these parts. Found the Alternator pulley.

[68cobra427]

Reach out to Branda performance 1-800-458-3477

[68cobra427]

JD Larson 1-701-624-3673

[Kyle]

Hi all

I am looking for a NOS C7ZZ-3A713-B power steering return hose.

Thanks Kyle.

[Kyle]

Found rear 31 rear axle shafts. Still looking for the other.

[brandosaac]

looks like you found axles,
 but if they dont pan out for you let me know, I have a set

[TLea]

Kyle, I have 590 clamps. On the intake bolts the 5 is most common but not only ones used. The short ones can have the RSC mark and I have seem several of the longer ones of the castellated type used on the fuel log. They need to be the ones with the letters not the unmarked like AMK has

[Bob Gaines]

Kyle, I have 590 clamps. On the intake bolts the 5 is most common but not only ones used. The short ones can have the RSC mark and I have seem several of the longer ones of the castellated type used on the fuel log. They need to be the ones with the letters not the unmarked like AMK has

F , 5 , and L5 are the most common makers mark on the GT500 intake bolts. The markings were typically seen being used during different times in production.

[Kyle]

Thanks both of you! Tim I need 590\C/ not 590\E/. Can you send me an Email with pictures the ones you have please?  On the intake bolts if you have one type for sale let me know also please?