1967 side stripes ?

[shelby1817]

Ready for the Side stripes on 1967 #273 GT500 who has the best quality and correct stripes  some pics of the restoration attached. Been way too long... thank you for the help Ken

[JD]

I believe the '67 Shelby stripes Branda sells are concours correct. Note the correct placement for '67's.

Congrat's on your progress!

(Can you post the images in .jpg format many can't open the .heic files.  .heic = (High Efficiency Image Container) file, HEIC files are the standard image format for Apple devices.)

[Coralsnake]

I would suggest loading the doors and fully attaching fenders before you stripe the car.

[98SVT - was 06GT]

I would suggest loading the doors and fully attaching fenders before you stripe the car.

+1 - the car should basically be finished (gaps adjusted, etc) when the stripes go on.

[tesgt350]

PLUS: the size of the Center Stripe Gap from the Door.........

[TLea]

I would suggest loading the doors and fully attaching fenders before you stripe the car.

and drivetrain in, suspension, car sitting on ground etc, etc. Stripes should be one of last things

[JD]

Side stripe placement... note '67 at top of sheet

[shelby1817]

Thank you everyone on the input for stripes First and foremost the stripes will go on last after everything is hung weighted and settled down... The sheet metal moves... As for the block yes there is not one between the fender and door.... all good  I thought some of the lettering was not quite correct in the font?  Still have a long way to go but will be enjoying every minute  to come.

[shelby1817]

jpeg photos as asked for

[shelby1817]

j peg as someone asked for

[Bob Gaines]

j peg as someone asked for

Looking good but don't get ahead of yourself. As others have said wait until the car is all but completely done before side striping.

[shelby1817]

ABSOLUTLY

[JD]

Fresh Lime looks Great!