69/70 Shelby Console, Mounting Plate for Switches & Circuit Breakers

[tgilliam]

Looking for information and/or a source for the thin metal plate underneath the console cover. Based on pictures I can find the fog light and interior light switches fit through this plate and the two(2) circuit breakers are secured to this plate. There appears to be a right angle bend in the metal on the end closest to the ash tray opening in the console top. I did not realize this part was missing from my console until the other day.
If anyone has this part I would be interested in purchasing it, getting some detailed pictures and exact dimensions or identifying a source of someone who may be making these for the Shelby console tops. The part does not look too complicated - with some clear details I could make one myself. However, right now I do not have anything to go by for a pattern.
Any help would be appreciated.

Tom Gilliam
tom@jtgil.com
(270) 847 - 8093

[Coralsnake]

Tom,

If I get a chance I will look this weekend.

You can call to remind me

[TLea]

I may have one, Tom I will check when I get back on Tuesday

[Coralsnake]

Here is the drawing I made.  Not to scale

The metal is .04 thick. You will have to decide where the holes go for the switches and circuit breakers.

Everything is very symetrical. Once the switches are in the sides of the switches are at the sides of the metal bracket

[Special Ed]

The .5x.5 square hole is for ashtray light socket clip holder.

[tgilliam]

Thank You for the responses. Thanks Pete for the drawing. If I have to we can probably make one.
Tim, Thanks for the response. Let me know if you happen to have one.

Tom Gilliam
tom@jtgil.com