Suggestions for adhesive to repair early roll bar wrap?

[BGlover67]

 Can anyone give me a suggestion for an appropriate adhesive to fix some loose wrapping on an early roll bar?  It's just pulling away in a few places but I don't want to use something too strong in case it has to be removed at some point in the future.

[JD]

double-stick tape (two-sided) or contact adhesive (Rubber Cement)  ???

[TOBKOB]

3M makes a spray adhesive that you may be able to spray in a container and quickly brush on. It holds really well when sprayed on but dries pretty quick and I have never tried to brush on. May be worth a try.

TOB

[2112]

https://www.amazon.com/3M-08008-Black-Weatherstrip-Adhesive/dp/B00063X38M/ref=sr_1_1_sspa?ie=UTF8&qid=1536845748&sr=8-1-spons&keywords=3m+weatherstrip+adhesive&psc=1

Do Not use silicone adhesive like 3M 5200 unless you want it there forever

[Bob Gaines]

Can anyone give me a suggestion for an appropriate adhesive to fix some loose wrapping on an early roll bar?  It's just pulling away in a few places but I don't want to use something too strong in case it has to be removed at some point in the future.

I have always used the yellow contact cement. The trick is to apply it to both surfaces and then let them start to set up 3 or 4 minutes before trying to apply . It will typically stick together with resolve but not so terribly strong that it can't be persuaded to separate if you have to.