News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

67 sewn trunk mat

Started by acman63, February 24, 2019, 12:41:00 PM

Previous topic - Next topic
Print
Go Down Pages1 2
User actions

acman63

February 24, 2019, 12:41:00 PM
I was thinking that someone makes a close facsimile of the original style sewn trunk mat .  Any ideas?
SAAC Concours Chairman

Owner Shelby Parts and Restoration Since 1977

SAAC original first year member

Bob Gaines

#1
February 24, 2019, 12:49:24 PM
Quote from: acman63 on February 24, 2019, 12:41:00 PM
I was thinking that someone makes a close facsimile of the original style sewn trunk mat .  Any ideas?
I think ACC does them sewn on request. A rep came to R+A Motorsports and documented one of mine a few years back for the purpose.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

greekz

#2
February 24, 2019, 01:21:53 PM
Bought a trunk mat from NPD 2017; Part Number TMB-9B, description, Trunk Mat, Burtex, Original Style/23590 08B.
SFM 6S1134  '67 GT-350 #2339

JD

#3
February 24, 2019, 01:47:16 PM
Image of a original - a bit hard to see...

'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

J_Speegle

#4
February 24, 2019, 07:11:32 PM
Few more to help illustrate the corner detail. Have done it by hand a couple of times. Not a fun task  ::)








Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

1967 eight barrel

#5
February 24, 2019, 10:19:13 PM
ACC does them. They are sewn just like the originals. I did have to trim a quarter inch off where the spare goes.

                                                                                                          -Keith

1967 eight barrel

#6
February 24, 2019, 10:35:23 PM Last Edit: February 24, 2019, 10:38:29 PM by 1967 eight barrel
Here are pictures of mine. It's Burtex like the original. It is sewn like the pictures.
                                                    -Keith.

csheff

#7
February 25, 2019, 11:14:55 AM
What is ACC website?

2112

#9
February 25, 2019, 12:51:25 PM

JD

#10
February 25, 2019, 01:52:54 PM Last Edit: February 25, 2019, 01:57:28 PM by JD
Quote from: 2112 on February 25, 2019, 12:51:25 PM

What is Burtex?


Not Vinyl - see the first image in Jeff's reply #4 - that's Butrex
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

2112

#11
February 25, 2019, 02:00:14 PM
Quote from: JD on February 25, 2019, 01:52:54 PM
Quote from: 2112 on February 25, 2019, 12:51:25 PM

What is Burtex?


Not Vinyl - see the first image in Jeff's reply #4 - that's Butrex

So that is the one we should be getting?

J_Speegle

#12
February 25, 2019, 02:07:21 PM
Quote from: 2112 on February 25, 2019, 02:00:14 PM
So that is the one we should be getting?

That would be what was originally installed so yes that is what you want not an all rubber or one of the vinyl with white felt finish on the back side

Here is a comparison of original and reproduction mat backsides. Not exact but much better than the other non-Burtex options

Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

1967 eight barrel

#13
February 25, 2019, 04:23:12 PM
The mat I posted in my Shelby is Burtex, not the crappy fleece-lined vinyl. They're about 135.00

                                                                                                                     -Keith

rcgt350

#14
February 25, 2019, 11:17:51 PM
So Do both ACC & NPD's Burtex come sewn, ready to install?
What's the 17691 part # giving you @ $420.24 ?
Print
Go Up Pages1 2
User actions