6S1415 for sale in Hemmings for $100K

[cob4ra]

It would be prudent for the next owner of this one to find some original vin to the chassis "before buying " ! That would be a really bad date " like finding out after the alcohol wears off; you wake up and find out you married the ugly sister by mistake " !

[Sfm6sxxx]

It would be prudent for the next owner of this one to find some original vin to the chassis "before buying " ! That would be a really bad date " like finding out after the alcohol wears off; you wake up and find out you married the ugly sister by mistake " !

Or, the "pretty" brother.

[98SVT - was 06GT]

Sounds like one of those roll a rust free Mustang under a Shelby tag restorations.

A common practice...But(big but)if you do it "right" you are likely breaking all sorts of state AND federal laws....Personally I prefer  real cars....

When I dinged the LF corner of my 66 I kept about a 10" section with the VIN so I could have some good welder butt weld it back in. I wasn't too worried as the car is registered by the SA# and it and the Ford# were undisturbed on the R side.

[GT350Lad]

It would be prudent for the next owner of this one to find some original vin to the chassis "before buying " ! That would be a really bad date " like finding out after the alcohol wears off; you wake up and find out you married the ugly sister by mistake " !

Or, the "pretty" brother.

Ouch but true, do the math on this one, I'll have a look at the registry

[GT350Lad]

Our new registry stops at 86, I guess anything after that isn't verified