News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

67GT500 Rear Springs

Started by 7777kx, September 28, 2019, 03:20:19 AM

Previous topic - Next topic

7777kx

I have a pair of take-off rear springs from a late production 67GT500. They are stamped C7ZA 5556 74J, can any forum members confirm they are correct for a 67 500? and if so, do they have a value? Any help would be much appreciated. Many thanks Alan

J_Speegle

Would expect that there is a letter or two missing from behind the C7ZA 5556

Might want to take another look or post a picture
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

JD

#2
Quote from: J_Speegle on September 28, 2019, 01:27:35 PM
Would expect that there is a letter or two missing from behind the C7ZA 5556

Might want to take another look or post a picture

^^^ That would seem more typical...

There might be some other threads that cover this, will look.

Edit: here's one:
http://www.saacforum.com/index.php?topic=6873.msg58273#msg58273
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

7777kx

Thank you for your replies and my apologies, the two missing stamped letters are AR.
The link to past posts was very helpful.
Any guess on value?
Many thanks
Alan

JD

"AR" is one of the sets that would be typical - perhaps the more typical.
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0