News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

#0544 The Supersnake GT500

Started by Richstang, March 04, 2018, 05:35:47 PM

Previous topic - Next topic

roddster

  The model is still in the box.  Good to know about the remote oil filter.  I was going by what I saw when the car was at the NMCN show a few years back.  At that time it was in the show with white wall tires, not Speedway 350's.  Probably stressing the tire test point.

gt350hr

  The single remote was from a 427 Cobra S/C , standard issue.
Celebrating 46 years of drag racing 6S477 and no end in sight.

Bob Gaines

Quote from: gt350hr on March 09, 2018, 11:52:52 AM
  The single remote was from a 427 Cobra S/C , standard issue.
You have to keep up with your reading because I already addressed that in reply #29. For those reading ( because Randy already knows this) that typically only the 427 SC got the remote cooler. The regular (if it can be called that  ;) ) street 427/428 Cobra used the typical BB oil filter adapter but instead of a FL1 standard filter it used a shorty alternate filter to fit between the adapter and the main tube. There is a Ford equivalent but the SA paperwork calls for a short Fram filter













BB oil filter
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby


roddster

  I know that if I just spent 2.2 million on it, I'd have to park it (for a while) in my living room.

FL SAAC

Quote from: roddster on April 11, 2019, 10:08:14 AM
  I know that if I just spent 2.2 million on it, I'd have to park it (for a while) in my living room.

or drive it cross country....
When you arise in the morning, think of what a precious privilege it is to be alive to breathe, to think, to enjoy, to love. ~
Marcus Aurelius Antoninus Augustus

Home of the Amazing Hertz 3 + 1 Musketeers

I have all UNGOLD cars

gt350hr

Quote from: Bob Gaines on March 09, 2018, 02:47:07 PM
Quote from: gt350hr on March 09, 2018, 11:52:52 AM
  The single remote was from a 427 Cobra S/C , standard issue.
You have to keep up with your reading because I already addressed that in reply #29. For those reading ( because Randy already knows this) that typically only the 427 SC got the remote cooler. The regular (if it can be called that  ;) ) street 427/428 Cobra used the typical BB oil filter adapter but instead of a FL1 standard filter it used a shorty alternate filter to fit between the adapter and the main tube. There is a Ford equivalent but the SA paperwork calls for a short Fram filter


Yes  sorry Bob , I should have said  standard issue for an S/C LOL. That remote was sourced from Holman Moody initially. It is also interesting ( and I remember seeing them) that the Fram "short" filter was the original "spec" filter on non oil cooler equipped 427 Cobras. It's not like the filter would hit the ground before the oil pan.


  BTW , Don't feel bad about passing up on the SS. I ( and several others) passed up on Royal Krieger selling the "flip top" Cobra for $5,000. Sure it was a "basket case" at the time and more money than I had in the bank 40+ years ago but "shoulda , woulda , coulda" applies as well. If it was purple , I might have made the leap. LMAO.
      Randy








Celebrating 46 years of drag racing 6S477 and no end in sight.

J_Speegle

Quote from: gt350hr on April 11, 2019, 12:40:27 PM
  BTW , Don't feel bad about passing up on the SS. I ( and several others) passed up on Royal Krieger selling the "flip top" Cobra for $5,000. Sure it was a "basket case" at the time and more money than I had in the bank 40+ years ago but "shoulda , woulda , coulda" applies as well. If it was purple , I might have made the leap. LMAO.
      Randy

Oh the cars many of us should have bought - looking backwards. It would make for another long thread. But most of us, if we could go back, would likely make the same choice given the same mindset and situation.

In the future we may think the same way "shoulda , woulda , coulda" about our choices we make today. Just part of our experiences. :)
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

6972boss

Yea, shoulda coulda woulda.  I remember coming across a 71 fastback with two different VIN  numbers on ebay. I Thought,  hmm This could be the prototype Boss 351. I waited 2 seconds too long and, BOOYAW!  I was right! it turned out to be the the one BOSS 351 prototype. 1.5 mil later i am on the sidelines.

69mach351w

Quote from: 6972boss on April 11, 2019, 11:03:31 PM
Yea, shoulda coulda woulda.  I remember coming across a 71 fastback with two different VIN  numbers on ebay. I Thought,  hmm This could be the prototype Boss 351. I waited 2 seconds too long and, BOOYAW!  I was right! it turned out to be the the one BOSS 351 prototype. 1.5 mil later i am on the sidelines.
Didn't Bob Perkins buy it from the ebay purchaser?

6972boss

Yup. For a nice tidy sum! Perkins has all the goodies to make it a 71 boss 302. I think he is almost done.

69mach351w

#41
I've been aiming to get up to Juneau WI for years to see Bob's massive collection and resto shop, just haven't been able to yet.


http://perkinsrestoration.com/current-projects/